Lake Look - Fix A Leak for the Lake

Look for the WaterSense label for products independently tested and certified to meet EPA’s water efficiency and performance criteria.

Drip. Drip.Drip. It’s easy for the sound of a leaky faucet to become just part of the background noise in your household. With a large body of fresh, relatively clean water like Lake Champlain so close by, water conservation often doesn’t seem like a meaningful environmental issue. Yet there are environmental consequences of ignoring that drip.

The average home wastes 10,000 gallons of water annually due to easy-to-fix leaks according to the Environmental Protection Agency’s (EPA) WaterSense Program. Nationwide, household leaks add up to more than 1 trillion gallons lost each year. The Lake Champlain Committee is one of EPA’s national WaterSense partners working to promote water conservation.

Wasting water can contribute to lake pollution. Sewage treatment facilities remove phosphorus pollution from the water that leaves our homes. However, the efficiency of pollution removal at the sewage treatment facility decreases when sewage is diluted by leaked tapwater. Furthermore, municipal drinking water systems often add aphosphorus containing compound to drinking water to prevent lead from leaching from old pipes. This compound must then be removed from wastewater before it enters Lake Champlain. Of course, removal is not 100% efficient, so waste of water leads to additional phosphorus pollution.

Wasted water also means wasted energy, and this factor is probably even more significant than the extra phosphorus added to the lake. Water must be pumped from its source, often Lake Champlain, to its end use in houses, apartments, businesses, and institutions. Moving water to where it will be used is a highly energy intensive process. Letting a faucet run for five minutes uses about as much energy asletting a 60-watt light bulb run for 14 hours.

Given that each American uses an average of 100 gallons of water every day at home, it’s easy to find a few gallons to spare. We can all start saving water today with three simple steps: Check. Twist. Andreplace.

First, check toilets to reveal any silent leaks. Easy-to-fix household leaks can waste enough water each year to fill a backyard swimming pool. Just add a few drops of food coloring to the toilet tank and wait 10 minutes before flushing. If dye appears in the toilet bowl,your toilet has a leak. If you find a leak, click here for do-it-yourself repair tips or contact a plumbing professional.

Second, if you don’t have them already, twist an aerator onto each bathroom faucet to save water without noticing a difference in flow. Faucet aerators cost as little as a few dollars and can save a household more than 500 gallons each year—enough to do 14 loads of laundry. For confidence that an aerator will have your faucet using 30 percent less water while still flowing with force,look for the WaterSense label, which is only awarded to products independently tested and certified to meet EPA’s water efficiency and performance criteria.

Third, replace your old showerhead with a WaterSense labeled model, which helps you shrink your water footprint while still enjoying a satisfying shower. Making this switch not only reduces a household’s water use by 2,300 gallons annually but also saves enough energy from heating less water to power a television for a year. Accompanying savings on utility bills are an added bonus.

Want to do more? Visit LCC’s Water Conservation page for additional actions to take. Leaky faucets may not cause as much concern as global warming or algae blooms on Lake Champlain yet they contribute to both, and it’s within our power to take control of the situation, and fix our leaks.